J Boats J/122E

Beautiful, responsive, comfortable & fast

The 40' performance cruising & racing standard

Hull & Deck Construction
• SCRIMP infusion molded sandwich construction
• Uni-and multi-directional fiberglass fabrics
• Low density light weight balsa core
• Vinylester infusion resin
• 10 year anti-osmosis warranty and a 5 year structural warranty
• Bonded overlapped hull-to-deck joint
• Infused structural grid and mast step
• SCRIMP infusion molded main bulkhead

Keel & Rudder
• Low VCG keel with encapsulated cast iron fin & lead bulb
• Keel is bolted & bonded to shallow sump
• High aspect ratio composite rudder
• Uni and multi-directional fiberglass fabrics
• Stainless steel rudder stock
• Self-aligning performance rudder bearings

Spars & Rigging
• Carbon fiber mast with double swept spreader configuration
• Aluminum racing boom
• Pre-molded mast wedge system
• Adjustable mast step
• Discontinuous rod standing rigging
• Hydraulic backstay adjuster with panel on steering pedestal
• Jib furling system with below deck furler drum
• Carbon fiber retracting bow sprit
• Solid boom vang with purchase
• Complete running rigging package

Deck Hardware
• Harken winches & deck hardware
• Below deck 2:1 mainsheet system
• Floor mounted mainsheet traveler
• Adjustable jib tracks including 8:1 adjustable purchase
• Custom stainless steel shroud and backstay chain plates
• Bow and stern mooring cleats
• Bow anchor locker
• Overhead ventilation hatches for head, forward cabin, head & main salon
• Opening port lights for head, forward cabin, head, main salon & aft cabins
• Exhaust vent openings in main cabin overhead below sea hood
• Bow & stern rails & stanchions supported double lifelines
• Cabin top handrails
• Aluminum racing wheel with leather cover
• Compass on wheel pedestal with stainless binnacle guard
• Acrylic companionway washboard with lock, stored in aft cockpit locker
• Emergency tiller

Auxiliary Power
• Volvo D2 40 HP Saildrive diesel engine & 115 AH alternator
• Volvo engine controls & fuel gauge recessed in cockpit with acrylic protection
• 35 gallon aluminum fuel tank
• Sound insulated engine compartment, ventilation pipes
• Two-blade folding propeller

Systems
• Manual & Electric bilge pumps
• Pressurized fresh water system with hot water tank (5 gallon)
• Fresh water tank (42 gallon)
• DC refrigeration
• Marine toilet with holding tank system and pump out
• Two 80 AH AGM type batteries & one 70 AH battery for engine
• 12V Electrical distribution panel
• 110V distribution panel, main circuit breaker and inlet
• Halogen head & cabin lighting package
• Low voltage LED navigation lights, mast steaming and mooring lights
• Grounding system for protection against lightning
• Battery charger

Interior
• Choice of layout options: 3 cabin or 2 cabin (see illustration above)
• Cold-molded, solid, and laminated mahogany wood, finished in satin varnish
• White wood effect on hull in main cabin, vinyl lining on hull in sleeping cabins
• Cored and insulated doors to all cabin areas
• Molded & enclosed head area forward with shower, storage, large sink
• Forward cabin V-berth with locker & shelf storage with great ventilation
• Main salon area with settee berths, table, lockers, safety handrails
• Large galley with double sink, LPG stove/oven, and plenty of outboard storage
• Nav station with chart and gear storage, drawers & panel for electronics
• Aft cabins with large double berths, storage lockers and shelves, port lights
• Offshore protected companionway with handrails and angled ladder treads


Notice:
Specifications are subject to change prior to delivery due to deletions, additions or revisions in quantity, brand or design at the sole discretion of J Boats, Inc.